How to upgrade your i-FlashDeviceHD Flash Drive

written by althemax.com

: www.althemax.com

How to upgrade your i-FlashDeviceHD Flash Drive

Related Products: 8GB USB i-Flash Drive, 16GB USB i-Flash Drive, 32GB USB i-Flash Drive, 64GB USB i-Flash Drive, 

Introductions

● Please directly inserted into the computer, don't use ‘USB
Extension Cable USB’ or ‘USB HUB’

● Computer hardware environment(电脑硬件环境)：
CPU： More than 2.0G；
Memory： More than 1GB；
Hard disk： 80G；
Support system： Windows 2k/xp/vista/7 and 32bit
Operating steps：

1.Open the software(打开软件)
1> Right Click and Open as admin （双击如下图标）

2> Software interface（软件界面）

2.Insert ‘Flash Drive’ to PC and Select Tool (插入 U 盘并选择工具)

1> Correct, next step（工具选择正确,进行下一步操作） ;

2> According to the prompt replacement tool and Start operation， pull out flash drive， back to step 1（根据提示更换工具，拔出 U 盘，回到第一步重新开始操作） ;

3.If the device has already， Click “start” (如果设备已就绪，点击“ start” )

1> Complete upgrade, pull out flash drive（完成升级,拔出 U 盘）；

2> Update failed， Start operation， pull out flash drive， back to step1（升级失败，拔出 U盘，回到第一步重新开始操作）；

3> If there are other anomalies， pull out flash drive， back to step1（如果出现其他异常情况，
拔出 U 盘，回到第一步重新开始操作）；

4.If update success.Please Off the tools,let ‘flash drive’ run in PC twice,To
ensure that the upgrade is complete!（升级成功后，请关掉升级软件在 PC 上运
行两次，以确保升级完成!）

Q&A:

Q： Insert the computer, prompted ‘unknown file’ or ‘virus’?
插入电脑后，出现提示不明文件或者是病毒？

A： Close the firewall (such as anti-virus software).关闭防火墙（杀毒软件等软件）

Q： Open the wrong or can't open?(打开出错或者无法打开？)

A： The identity of the need to use the administrator to open the tool.(需要用管理员的身份打开工具。)

Q： Click "start" no response?多次单击‘ start’无反应？

A： Pull out ‘FlashDrive’ and close the tool, back to step1;Or, insert another USB interface;Or, In another computer. 拔出 U 盘并关闭工具，回到第一步重新操作；或者换另外一个 USB 接口再操作；或者更换一台电脑再操作

Q：‘ Update fail(升级失败)!’？

A： Pull out ‘FlashDrive’ and close the tool, back to step1;Or, insert another USB interface;Or, In another computer.

拔出 U 盘并关闭工具，回到第一步重新操作；或者换另外一个 USB 接口再操作；或者更换一台电脑再操作

Q： repeated 'Update fail and fail (upgrade)!'?反复出现‘ Update fail(升级失败)!’？

A： Pull out ‘FlashDrive’ and close the tool, back to step1;Or, insert another USB interface;Or, In another computer.

拔出 U 盘并关闭工具，回到第一步重新操作；或者换另外一个 USB 接口再操作；或者更换一台电脑再操作